Regional
Call Router & Single Site Interconnect
The Regional Control Processor is used to connect together up
to 10 sites to form a regional coverage network. The RCP performs
all the Inter-site call set-up management tasks, including PSTN,
PABX's and hardwired dispatchers (MHD).
Single
site Interconnect
The (SSIU) is a low cost cut down version of the RCP and allows
connection of a site to the PSTN or PABX. Ports to attach an
MHD and the system control terminal are included.
Message Handling Dispatcher
The
Message handling dispatcher operates as fixed dispatcher terminal
for an entire region.
An external audio unit is also required to route the audio
to the operators headset.
The
terminal operates a stacking system, that displays call requests
as they are propagated through the network. Calls of a higher
importance are displayed using different colours.
The operator may initiate calls based on the request stack or
a selected radio unit. Any status or short data message calls
will be displayed on the terminal as a text message.
Each region provides a connection point for one dispatcher terminal.
The use of an MHD Concentrator will allow 16 terminals to be
connected to a single port without any impact on performance.
Inter-Regional
Processor
 |
The
Inter-Regional Processor is used to connect up to 16 regions
to form very large networks.
Communication with each regions Regional Control Processor
can be at either 9600 or 19200 Baud.
The Inter-Regional processor is based upon an industrial
PC platform. A silicon ram disk replaces the hard disk
to ensure high reliability + very high speed. |
AUTOMATIC VEHICLE LOCATION:
Sophisticated
GPS circuitry interfacing with multiple carriers handling transmission
over MPT 1327. PMR and Packet Data can provide on demand monitoring
of vehicle location, movement, distance, time, speed and vehicle
switch conditions e.g. hazard lights and ignition position.
Combining INCA with Co-ordinator creates the most comprehensive
asset location and tracking solution available.
REPEATERS:
MTR2000
 |
·
12.5 / 25 / 30 kHz switchable channel spacing
· Compact and lightweight
· Field programmable
· Continuous duty cycle operation
· Software based design |
MPT1327
RADIOS:
Radios
available from a wide range of manufacturers. Over 10 manufacturers
produce portables and mobiles to support all the features
of the MPT1327 Trunking protocol. MPT Trunking Radio manufacturers.
· ICOM
· MAXON
· MOTOROLA
· SIMOCO
· TAIT
· TELTRONICS
· KENWOOD
|
![[Home]](images/smain_r2_c1.jpg){kind=small}
![[Company]](images/smain_r2_c3.jpg){kind=small}
![[Services]](images/smain_r2_c4.jpg){kind=small}
![[MPT1327]](images/smain_r2_c7.jpg){kind=small}
![[Vendors]](images/smain_r2_c9.jpg){kind=small}
