BroadBand
Wireless
BreezeACCESS™
II
The AU-A-NI or AU-E-NI units are available with either 26dBm
(HP-High Power), 17dBm (MP-Medium Power) or 2dBm (LP-Low Power)
output power at the antenna port. The AU-NI units are powered
from the mains (100-250 VAC). A coaxial cable connects the indoor
module to the outdoor unit and serves for the transmission of
signals as well as for transferring power, management and control
signals from the indoor module to the outdoor unit. Connectivity
to the network is established through a standard IEEE 802.3
Ethernet 10BaseT (RJ 45) interface.
The
same outdoor units are found in the AU-BS and AU-NI models,
ensuring cost savings when scaling upwards from a Micro-Cell
installation to a complete Base Station.
Miniature
Indoor ACCESS Units
The
miniature indoor units, designed primarily for indoor installations,
are comprised of a single desktop or wall-mountable unit powered
from the mains (100-250 VAC).
· The AU-I products include two 2dBi integrated omni
antennas.
· The AU-ID products have two RF connectors for detached
diversity antennas.
Connectivity to the network is established through a standard
IEEE 802.3 Ethernet 10BaseT (RJ 45) interface.
BS-SH
 |
19"
chassis that can contain up to 7 (1 redundant) BS-AU modules
and power supply modules. |
AU-A-BS
 |
Access
Unit includes a module to be inserted into the base station
chassis as well as an outdoor unit with an integrated
flat panel antenna |
AU-E-BS
 |
Access
Unit includes a module to be inserted into the base station
chassis as well as an outdoor unit with an external antenna
(sold separately). |
BS-PS
 |
Power
supply unit for the base station chassis. Powered from
a -48 VDC power source. |
U-E-BS
|
Stand-alone
Access Unit with flat antenna. |
AU-E-NI
|
Stand-alone
Access Unit with external antenna (sold separately). |
AU-I
 |
Miniature
indoor Access Unit with attached 2dBi antennas. |
Customer Premises Equipment
 |
BreezeACCESS
II Subscriber Units with an Outdoor Radio Unit and Antenna
These Subscriber Units are comprised of an indoor desktop
or wall-mountable unit and an outdoor unit. ? In the SU-A
model, the SU-RA outdoor unit contains a radio module
and an integrated flat panel antenna. ? In the SU-E line,
the SU-RE outdoor unit contains the radio module and an
RF connector for a separate external antenna. A coaxial
cable connects the two units and serves for the transmission
of data as well as for transferring power, management
and control signals from the indoor unit to the outdoor
unit. |
SU-A
and SU-E units are available with either 26dBm (HP-High Power),
7dBm (MP-Medium Power) or 2dBm (LP-Low Power) output power at
the antenna port. The Subscriber Unit connects to data equipment
using a standard IEEE 802.3 Ethernet 10BaseT (RJ 45) interface.
The data plus voice subscriber units support telephony services
through a standard POTS (RJ 11) interface that connects to a
telephone.
CONTINUE
->
|
![[Home]](images/smain_r2_c1.jpg){kind=small}
![[Company]](images/smain_r2_c3.jpg){kind=small}
![[Services]](images/smain_r2_c4.jpg){kind=small}
![[MPT1327]](images/smain_r2_c7.jpg){kind=small}
![[Vendors]](images/smain_r2_c9.jpg){kind=small}
