BROADBAND
WIRELESS ACCESS (BWA)
BreezeACCESS™ II
The
BreezeACCESS II Broadband Wireless Access system operates
worldwide in the license-free ISM band delivering high-speed
wireless Internet access. Utilizing the unlicensed 2.4
GHz band permits use of the spectrum without the expense
of buying
or applying for a license, allowing ISPs to quickly enter
and compete in the market at relatively low costs. With
an exceptionally low initial investment, BreezeACCESS II
is the ideal solution for new operators wanting to build
their customer base. Once the wireless infrastructure
is in place, it can be scaled upward to support thousands
of subscribers per cell. BreezeACCESS II operates in Time
Division
Duplex (TDD) mode utilizing proven Frequency Hopping technology
to deliver
a solution that is highly secure, robust and reliable.
Optimized for data and voice communications, BreezeACCESS
II allows
ISPs and ASPs to rapidly and economically deploy their
networks and offer highly attractive, competitive services
to their
clients.
 Base
Station Equipment:
|
 The
BreezeACCESS II family
includes a Base Station
Unit and three types of
Access Units with differing
architectures:
Base Station Shelf
with Access Unit
Modules
The BS-SH Base Station Unit is a 19" chassis
that contains up to seven (one redundant) BS-AU
modules. The BS-AU Access Units can be synchronized
to ensure optimal utilization of the frequency
spectrum available. The BS-SH chassis contains
one power supply with an alternative second power
supply for redundancy. The BS-PS power supply modules
are powered from a -48 VDC power source.
The AU-A-BS Access Unit model is comprised
of an indoor module (BS-AU) and an AU-RA outdoor
unit, which contains a radio unit and an integrated
panel antenna.
The AU-E-BS Access Unit model is comprised
of an indoor module (BS-AU) and an AU-RE outdoor
unit, which contains a radio module and an RF connector
for a separate external antenna (the external antenna
is sold separately to the unit).
The AU-A-BS or AU-E-BS units are available with
either 26dBm (HP-High Power), 17dBm (MP-Medium
Power) or 2dBm (LP-Low Power) output power at the
antenna port. A coaxial cable connects the indoor
module to the outdoor unit and serves for the transmission
of signals as well as for transferring power, management
and control signals from the indoor module to the
outdoor unit. Connectivity to the network is established
through a standard IEEE 802.3 Ethernet 10BaseT
(RJ 45) interface.
Stand-Alone “Micro-Cell” Access
Units
The Stand-Alone Access unit enables the coverage
of a small customer base or an area with low customer
density. The AU-A-NI and AU-E-NI lines are comprised
of stand-alone units, which connect to an SU-RA
or an SU-RE outdoor unit. The indoor part of the
Access Unit, the AU-NI, is a stand-alone desktop
or wall-mountable unit.
- In
the AU-A-NI model,
the AU-RA outdoor
unit contains a radio
unit and an integrated
panel antenna.
- In
the AU-E-NI model,
the AU-RE outdoor
unit contains a radio
module and an RF
connector for a separate
external antenna
(the external antenna
is sold separately
to the unit).
The
AU-A-NI or AU-E-NI units
are available with either
26dBm (HP-High Power),
17dBm (MP-Medium Power)
or 2dBm (LP-Low Power)
output power at the antenna
port. The AU-NI units are
powered from the mains
(100-250 VAC). A coaxial
cable connects the indoor
module to the outdoor unit
and serves for the transmission
of signals as well as for
transferring power, management
and control signals from
the indoor module to the
outdoor unit. Connectivity
to the network is established
through a standard IEEE
802.3 Ethernet 10BaseT
(RJ 45) interface.
The same outdoor units are found in the AU-BS and
AU-NI models, ensuring cost savings when scaling
upwards from a Micro-Cell installation to a complete
Base Station.
Miniature Indoor
ACCESS Units
The miniature indoor units, designed primarily
for indoor installations, are comprised of a single
desktop or wall-mountable unit powered from the
mains (100-250 VAC).
- The
AU-ID products have
two RF connectors
for detached diversity
antennas.
Connectivity
to the network is established
through a standard IEEE
802.3 Ethernet 10BaseT
(RJ 45) interface. |
|
|
|
|
19" chassis
that can contain up to
7 (1 redundant) BS-AU modules
and power supply modules. |
|
 |
| Technical
Specifications |
|
|
|
|
|
|
Access
Unit includes a module
to be inserted into the
base station chassis as
well as an outdoor unit
with an integrated flat
panel antenna |
|
 |
| Technical
Specifications |
|
|
|
|
|
|
Access
Unit includes a module
to be inserted into the
base station chassis as
well as an outdoor unit
with an external antenna
(sold separately). |
|
 |
| Technical
Specifications |
|
|
|
|
|
|
Power
supply unit for the base
station chassis. Powered
from a -48 VDC power source. |
|
 |
|
|
|
|
|
|
|
Stand-alone
Access Unit with flat antenna. |
|
 |
| Technical
Specifications |
|
|
|
|
|
|
Stand-alone
Access Unit with external
antenna (sold separately). |
|
 |
| Technical
Specifications |
|
|
|
|
|
|
Miniature
indoor Access Unit with
detached antenna. |
|
 |
| Technical
Specifications |
|
|
|
Customer
Premises Equipment: |
BreezeACCESS
II Subscriber
Units with an
Outdoor Radio
Unit and Antenna
These Subscriber Units are comprised of an indoor desktop or wall-mountable
unit and an outdoor unit.
- In
the SU-A
model, the
SU-RA outdoor
unit contains
a radio module
and an integrated
flat panel
antenna.
-
In
the SU-E
line, the
SU-RE outdoor
unit contains
the radio
module and
an RF connector
for a separate
external
antenna.
A coaxial cable connects the two units and serves for the transmission
of data as well as for transferring power, management and control
signals from the indoor unit to the outdoor unit.
SU-A and SU-E units are available with either 26dBm (HP-High Power),
7dBm (MP-Medium Power) or 2dBm (LP-Low Power) output power at the
antenna port.
The Subscriber Unit connects to data equipment using a standard IEEE
802.3 Ethernet 10BaseT (RJ 45) interface. The data plus voice subscriber
units support telephony services through a standard POTS (RJ 11)
interface that connects to a telephone.
BreezeACCESS II Miniature Indoor Units
The miniature indoor units, designed primarily for indoor installations,
are comprised of a single desktop or wall-mountable unit.
- The
SU-ID
products
have
two
RF
connectors
for
detached
diversity
antennas.
|
|
|
|
|
Subscriber
unit with indoor
module and outdoor
radio unit with
integrated antenna.
SU-A-1D-2.4 Supports a single Ethernet device
SU-A-BD-2.4 Supports a LAN (bridge)
|
|
|
| Technical
Specifications |
|
|
|
|
|
|
Subscriber
unit with indoor
module and outdoor
radio unit with
detached antenna
(sold separately).
SU-E-1D Supports a single Ethernet device
SU-E-BD Supports a LAN (bridge) |
|
|
| Technical
Specifications |
|
|
|
|
|
|
A
miniature indoor
unit with two connectors
for one or two
detached diversity
antennas.
SU-ID-1D-2.4 Supports a single Ethernet device
SU-ID-BD-2.4 Supports a LAN (bridge)
|
|
|
| Technical
Specifications |
|
|
|
|
|
|
Subscriber
unit with indoor
module and outdoor
radio unit with
detached antenna
(sold separately)
The unit includes
a regular telephone
interface.
SU-E-1D1V-2.4 supports a single Ethernet device and a
regular telephone interface
SU-E-BD1V-2.4 supports a LAN (bridge) and a regular telephone
interface
|
|
|
| Technical
Specifications |
|
|
|
|
|
|
Wireless
mobile data subscriber
unit designed for
the Homeland Security
marketplace.
Datasheet
|
|
 |
| Technical
Specifications |
|
|
|
|
|
|
|
|
|
|
|
![[Home]](../images/smain_r2_c1.jpg){kind=small}
![[Company]](../images/smain_r2_c3.jpg){kind=small}
![[Services]](../images/smain_r2_c4.jpg){kind=small}
![[MPT1327]](../images/smain_r2_c7.jpg){kind=small}
![[Vendors]](../images/smain_r2_c9.jpg){kind=small}
Fast
Access to the Internet and other IP-based Services
